Which glue use for kiteboarding valve

Kitesurfing is a sport that relies on strong and durable glues. If you are looking for the best glue to use when kitesurfing, then this article will help you out. Instead of using ordinary household products, I'll show you what types of glues are best suited for this type of job and how to use them correctly.

This blog post includes lots of tips about which type of glue to use for kitesurfing valves!

What is kitesurfing and why do you need a good glue for it

Kitesurfing is a sport where you use kite and a harness to power yourself on water or snow. You need strong and durable glues for this type of sport, but you want them to be light weight so they won't weigh down the kite with extra weight.

When I tried it out, I found that cheap glue will often break after just a few uses because when the winds pick up it builds up stress on the joints which makes the relatively brittle plastic snap under pressure.

When making my kite I used some nylon plastics that aren't quite as rigorous as what they would use in industry but are great for hobbyist like myself since you don't want your fingers getting caught in industrial grade materials! After using my favorite glues, super glue and epoxy, both of which I prefer to hot glue because it provides a more durable bond; I found that the joint between the two plastics was not very strong. This is where you want to use a good glue for kitesurfing valves!

Different types of glues for kitesurfing

  1. Epoxy glue: Epoxy glues are made by mixing two ingredients, a resin and a hardener. The resin is a plastic that will set when you mix the hardener into it. The resin, epoxy based glues are best used in kitesurfing valves.
  2.   Krazy glue: Krazy glue is a type of super glue, so it's the strongest you can get. It's not as good as epoxy for kitesurfing valves, but if you're in a pinch it will do the trick. It's very strong and can be used to hold large items together, but you have to make sure that the area isn't over exposed to water, because it will dissolve and then leak if the glue dries while still under water.
  3.   Hot glue: Don't use hot glue when making a kite, but it's good to have around if you want to make some decorations out of foamboard. It's good to use for small things, but I find that it doesn't hold as well as the epoxy and super glue.
  4.   Super Glue: Like krazy glue, it's good for large projects that don't get wet. Just remember that it's not good to use for kitesurfing valves because of the joint between the two materials, you may want to use it for the base attachments.
  5.   Cyanoacrylate: This is another type of super glue that comes in different varieties. Super glue is strong, but cyanoacrylate holds even stronger for kitesurfings valves. The problem with this type of adhesive is it doesn't offer as much flexibility, and has a hard time bonding to other things like wood.

How to use the right type of glue for your valves

When gluing the plastic plates make sure that they are perfectly flush with each other, and then apply a thin layer of glue. Let it dry for a few minutes so that it gets tacky to the touch before you place them together in your kite.

Make sure that you don't use too much glue, and make sure you hold them in place with clamps until they are firmly stuck together. If they are not bonded enough to each other then some of the strain will be placed on the joint between the two pieces making it more prone to break under stress.

When gluing, it's best to let the glue sit for about an hour before using your kite in case there are any air bubbles that get trapped and then pop when you use it. This weakens both of the plastic sheets that make up your kitesurfings valves.

The best way to store your glues so they aren't wasted or go bad!

  1. Make sure that they are clean and dry before you put them away
  2. Place a piece of paper towel in the bottle to absorb any moisture so it doesn't cause mold
  3.   Store the glue carefully on a shelf for easy access when you need to use it
  4.   Keep them out of direct sunlight, it will speed up the evaporation process
  5.   Don't store them next to anything sharp or with a strong smell, it can damage your bottles
  6.   Make sure you take the tops off when not in use so they don't get clogged inside and leak!


Epoxy based glues are best for kitesurfing, but they are also very strong and can be used on many other types of projects. They have great bonding properties so you can use them to make things that will hold up in the middle of a hurricane. I use it for making models of my kites, and I know a lot of people that use it to make replacement parts for their go-carts.

When using the right type of glue to hold your kitesurfing valves in place, you can be sure that they will last for years. The joints on your kite are what holds it together, and if those spots are loose than your kite is just a piece of plastic flailing around in the wind.

The type of glue that you use will depend on what project needs to be done, but if you're making a kitesurf board then always remember to get epoxy-based glue! It's strong enough to hold any material together, and not damage the plastic.

Kitesurfing is a fun hobby that you can do almost anywhere in the world, and it's just a blast to fly around with a group of friends while telling stories about your days at the beach. I hope this article helped you learn how to build better kitesurf board, or if you're trying to make some kite parts for your own project!

1 ratings